En
中文
Model: 3020R3-8
Compared with 3018 kits, it assembles supper tronger cast-iron frame, which provide the stability for high precision.
3020R3-8 with the small frame size could be easy to set in everywhere, such as the room, the workship, table and etc.
The machine would be installed and tested in the factory by QC, and two pre-assembled parts (gantry and the base bed) will be sent to you. Only take about half an hour to reassemble them easily.
3020 Mini CNC Router Machine for DIY Engraving
Feature
♦ CE approved
♦ Appearance Design Patent for the control box.
♦ Home switch: Emergency stop button + X, Y, Z axis limit switch.
♦800W Water cooling spindle: works more stable and durable.
♦ Ball Screws: High quality make the engraving more precision and longer life circle than trapezoidal screws.
Specification
Model: 3020R3-8
Frame size: 510x390x435mm(LxWxH)
Working bed: 430x240(LxW)
Frame Material: Aluminium alloy
Working Area: 300x200x70mm
Sliding unit: X and Z ø12 round rail guide; Y ø16 round rail guide
Drive unit: X, Y, Z SFU1204 Ball Screws;
Stepping motor: Nema 23, two-phase ,3A
Working Speed: 50-1500mm/min; 0-24000rpm
Spindle: 800W water-cooling, ER11 chuck, 6mm collet
Variable-frequency Drive: AC220V, 1500W, 0-400Hz (built-in Control box )
Carving command: G code/TAB file/nc/TAB /NCC/file
Input Volts: AC 220V(110V is available)
Software: Mach3
Supported： XP 32 bit or Win7 32 bit
Features
♦ CE approved
♦ Appearance Design Patent for the control box.
♦ Home switch: Emergency stop button + X, Y, Z axis limit switch.
♦ 800W Water cooling spindle: works more stable and durable.
♦ Ball Screws: High quality make the engraving more precision and longer life circle than trapezoidal screws.
Specification
| Model | 3020R3-8 |
| Frame size | 510x390x435mm(LxWxH) |
| Working bed | 430x240(LxW) |
| Frame Material | Aluminium Alloy |
| Working Area | 300x200x70mm |
| Sliding unit | X and Z ø12 round rail guide; Y ø16 round rail guide |
| Drive unit | X, Y, Z SFU1204 Ball Screws |
| Stepping Motor | Nema 23, two-phase ,3A |
| Working Speed | 50-1500mm/min; 0-24000rpm |
| Spindle | 800W water-cooling, ER11 chuck, 6mm collet |
| Variable-frequency Drive | AC220V, 1500W, 0-400Hz (built-in Control box ) |
| Carving Command | G code/TAB file/nc/TAB/NCC/file |
| Input Volts | AC 220V(110V is available) |
| Software | Mach3 |
| Supported | XP 32 bit or Win7 32 bit |
We'd Love to Hear From You , LET'S GET IN TOUCH!
PRODUCT
智能分站
Andy: andy@prtkj.com
+86-15986065829
Contact us
Address:
3th/25 Haibang Road, Yanbu, Dali Town, Nanhai District, Foshan City, Guangdong Province
Email:
Jack: Jack@prtkj.com
Andy: andy@prtkj.com
Phone:
+86-18899877803
+86-15986065829
Message
